Suzhou Boda Electronic Co., Ltd. · Authorized Automotive Distributor

Magnetic Sensing · Motor ControlAutomotive-Grade Part Selection & Supply

Selection, documentation and supply coordination for Hall-effect sensors, motor drivers and power-protection devices — from specification confirmation to volume delivery.

Start Selecting 138 1181 0805 Mr. Wang · Direct Line

Quick Selection Match 12 part numbers

Start Selection

Quality Assurance Automotive-grade supply system with lot traceability
Cost Advantage Direct-from-manufacturer channel with cost-down alternatives
Fast Response Same-day response to selection queries, samples delivered fast
Small batches, wide variety Fits fragmented project-stage demand, no supply gaps
Continuous Improvement A driven team growing alongside our customers

Product Center

Three product lines covering sensing, driving and powering

126 sensors, 42 motor drivers and 11 power management parts — datasheets and samples answered the same day.

Magnetic Sensing & Position Detection

stable magnetic switching for BLDC commutation, speed/direction detection and position memory

Latching HallDual-output Hall Angle SensorInductive EncoderCurrent Sensor 02

Motor Control & Encoding

From pre-driver to integrated driver, covering the complete control chain for brushed, single-/three-phase brushless motors

48V Pre-driverSingle-phase Brushless Drivers Three-phase Brushless DriversBrushed DriversMagnetic Encoder 03

Power & Protection

Stable power and protection devices covering LDO, DC/DC and TVS/ESD protection

LDODC/DCTVS / ESD Protection

Application Note

From pain point to device set

Each application explains the scenario requirements, recommended devices and implementation points. The full library is updated continuously.

Automotive Electronics

Door Lock Actuator

Door Lock 2-wire PCB-Less Current Output

Door lock actuator position detection without the local PCB and excess harness: SC25898/SC25896 connect straight to the ECU with 2-wire current output, with factory programming ensuring lot-to-lot consistency.

SC25898 / SC25896 PCB-Less 2-wire-40 to 150°C automotive grade

2026-09-14·5 minRead more

Robotics

Joint Motor

Robotic Joint BLDC Commutation & Speed Feedback

Three latching Hall devices at 120° handle three-phase commutation and initial positioning of the joint motor; the dual-channel signal is reused for speed and direction feedback, providing the position reference for FOC startup.

Latching Hall ×3 Dual-output HallThree-phase Brushless Drivers

2026-09-18·5 minFull detail page goes live in the production version

Consumer Electronics

Smart Home

Smart Lock & Robot Vacuum Battery-powered Detection

For battery-powered scenarios such as smart lock clutch position and robot vacuum bin detection, the SC2002 micro-power latching Hall starts from 1.8V and extends system standby time.

SC2002 (1.8V startup) Micro-powerBattery-powered

2026-09-04·3 minFull detail page goes live in the production version

Go to Application Library　16 application notes covering automotive, robotics, industrial and consumer electronics.

Certifications & Compliance

Onboarding documents ready, sent with your quotation

IATF 16949 system certificate and AEC-Q100 device qualification reports available on request

CERT-01

IATF 16949 system certificate

Certificate copies supplied against your onboarding checklist

CERT-02

AEC-Q100 device qualification report

Manufacturer qualification reports, per part number

CERT-03

Manufacturer authorization letter

Clear authorization chain, traceable sourcing

CERT-04

Datasheets and lot traceability documents

Datasheets and lot records supplied with the quotation

Engineering & Supply Support

More than supply — engineering capability

SVC-01

Device Selection & Documentation Support

We support specification checks, part matching, samples and documentation, providing full datasheets and application notes.

SVC-02

PCBA Collaboration

Coordinated support from prototyping and small batches to volume production, shortening the cycle from concept to prototype.

SVC-03

EMC & Magnetic Simulation

Pre-scan, rectification proposals, magnetic circuit and error evaluation — resolving issues before volume production.

SVC-04

Programming & Volume Production

Parameter configuration, production-line programming and supply coordination to protect volume schedules and delivery consistency.